Dw4000 manual

Quick Links. Table of Contents. See us on the World Wide Web at www. Previous Page. Next Page. Dewalt heavy-duty small angle grinder instruction manual 52 pages. Read and understand all instructions. Page 4 away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. Air vents often cover moving parts and should also be avoided.

Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents. Page 6 See pages 5—6 for information on choosing the cor- rect accessories. Wheels and other acces- sories running over their rated speed may fly apart and cause injury.

The same guard is designed for use with sanding flap discs Type 27 and 29 and wire cup brushes and wire wheels. Page 10 You may locate the guard to any convenient angle as long as the guard skirt is located between the operator and the acces- sory. Insert and tighten screws to secure guard in place. You should not be able to rotate guard by hand.

WARNING: Wheels used for cutting and edge grinding may break or kick back if they bend or twist while the tool is being used to do cut-off work or deep grinding. Page 12 4. Thread the assembled parts clockwise completely down on the spindle. Depress the spindle lock button while turning the sanding disc until the sanding disc and clamp nut are snug.

To remove the wheel, grasp and turn the backing pad and sanding disc while depressing the spindle lock button. Page 13 Mounting and Using Wire Brushes and Wire Wheels Wire cup brushes or wire wheels screw directly on the grinder spindle without the use of flanges.

A Type 27 guard is required when using wire brushes and wheels. Page 14 This warranty does not cover part failure due to normal wear or tool abuse. For further detail of warranty coverage and warranty repair information, visit www. This warranty does not apply to accessories or damage caused where repairs have been made or attempted by others. With 3 ton pressing force, the DW is suitable for an individual user, and it features 2 by 4 inches solid aluminum plates, two separate microprocessor-controlled temperature and timer panels, and a sturdy handle that makes the machine easy to lift and move.

The press comes with a 3-prong power cord, instruction manual, starter kit, and rubber mallet to adhere the handwheel to the frame of the machine.

This mallet can also be used with our hammer style pre-press molds. A complimentary starter kit includes all the basic tools and accessories necessary to start pressing right away: two rosin collection tools, non-stick silicone mat, 10 sheets of parchment paper, 3 ml rosin storage jar, and four magnets. Please note that the V presses are not shipped to US and Canada addresses. Add to Cart. Add to wishlist. Manual pdf ;. Rosin Pressing FAQ. Have general questions about how to press rosin?